TJ-JA-110225
nOTe
1. The cable must not be shortened or altered in any other
way.
2. The lantern must not be covered.
3. The rating label must not be removed.
4. disconnect the power before changing the bulb.
InsTAllATIOn
1. Make sure that the power is disconnected before instal-
lation.
2. The lantern is mounted directly on the wall or on a
mounting bracket for corner mounting e.g. The lantern
must be mounted on a vertical and level surface.
3. be sure of the exact mounting position before drilling
the holes. The position of the lantern will differ depend-
ing on whether the lantern is mounted upwards or
downwards.
4. drill holes for the junction box in the wall with a
Ø 5.5 mm drill and use the wall plugs and screws
provided or mount the junction box on the mounting
bracket.
5. Incoming cable is connected to the terminal block in the
junction box.
6. The sealing ring of the junction box must be intact, for
the protection class IP44 to be valid. The terminal block
must be fixed to the holder in the junction box.
AsseMbly
Upwards Lantern
1. Mount the wall bracket of the lantern on the wall with
the finial pointing downwards.
2. Attach the body of the lantern on the wall bracket by
turning it 60°.
3. Insert the glass and be careful with the sharp edges.
4. Insert suitable light bulb (see Technical data below).
5. Attach the lantern hat with the domed nuts and attach
the finial on the hat by turning it 60°.
Downwards Lantern
1. Mount the wall bracket of the lantern on the wall with
the finial pointing upwards.
2. Attach the lantern hat on the wall bracket of the lantern
by turning it 60°.
3. Insert suitable light bulb (see Technical data below).
4. Insert the glass and be careful with the sharp edges.
5. Attach the body of the lantern to the hat with the
domed nuts provided and attach the finial at the
bottom of the lantern by turning it 60°.
TecHnIcAl dATA
Energy saving lamp:
Max 18W, e27.
Connection:
Terminal block 3x2.5 mm².
Protection class:
IP44.
EN
Instruction Manual Idefjord 100
Model: 8001LA
77 171 20-21
Malmbergs elektriska Ab, PO box 144, se-692 23 kumla, sWeden Phone: +46 (0)19 58 77 00 Fax: +46 (0)19 57 11 77 [email protected] www.malmbergs.com
Art.no.
colour
dims WxHxd (mm)
77 171 20
black
230x430x268
77 171 21
White
230x430x268
This manual is valid for Idefjord with the following art.no:
