13
INSTALLATION
1. Remove diffuser from back plate.
2. Remove frame assembly from back plate.
3. Knock-out appropriate holes on back plate.
Connect the unit to an approved seal or
cable gland connector before installation.
4. Mount back plate.
5. Connect AC 230V power.
6. Connect battery connector.
7. Snap frame assembly to back plate.
8. Restore power and press the test button.
The battery powered lamp source will light on.
9. Snap diffuser to back plate.
1
PUSH
PUSH
PUSH
PUSH
2
3
Quick connector
Back plate
Frame assembly
Clear cover assembly
4
ASSEMBLY
Recessed Mounting
Use installation box (available as accessory)
for recessed mounting in harder materials.
Option 1
1. Two pictogram inserts included with arrow
Right/Left and Down.
2. Simply snap-in insert according to pic. A.
Option 2
1. Suspended emergency exit sign panel (available
as accessory) with arrow right, left and down.
2. Easy assembling, see pic. B.
A
B
This emergency light can be recessed or surface
mounted on the wall or in the ceiling with suspended
emergency exit sign panel (available as accessory).
