13
MOUNTING THE pROTECTIVE
DEVICES
Before any work on the machine itself, pull out
the power plug.
Protective Hood
The protection guard (5) must be mounted
when working with grinding or cutting discs.
place the protective hood on the spindle collar.
Adjust the position of the protective hood to
the requirements of the work process. Clamp
down with screw (6). The closed side of the
protective hood must always point towards the
operator.
Handle
When working with the machine, always
mount the handle.
Screw in the handle (2) on the right or left of
the machine head depending on the chosen
working method.
MOUNTING THE GRINDING TOOLS
Before any work on the machine itself, pull out
the power plug.
Use only grinding tools whose allowable speed
is at least as high as the idling speed of the ma-
chine. Grinding and cutting discs become very
hot during use; do not touch them until they
have cooled down. Clean the grinder spindle
and all parts to be mounted. For clamping and
loosening the grinding tools, lock the grinder
spindle (4) with the spindle locking button (3).
Activate the spindle locking button only when
the grinder spindle is at a standstill!
Grinding and Cutting Disc
Observe the dimensions of the grinding discs.
The diameter of the hole must fit retainer
mounting flange (M 14), (M 10). Do not use
any reducers or adapter.
For mounting, see the illustration to the left.
Screw on the clamping nut (9) and tighten with
the two-hole spanner.
DESCRIpTION OF pARTS
1. On/Off switch
2. Handle
3. Spindle locking button
4. Grinder spindle
5. protective hood
6. Screw
7. Retainer mounting flange
(for the M 14 grinding spindle with O-ring)
8. Grinding-/cutting disc
9. Clamping nut
