1. Water shortage indicator
Under the condi on of water shortage, the Water Shortage indicator keeps on, and when there is
adequate water, the water shortage indicator is off;
2. Indicator ring
When outpu ng cold water, the indicator ring turns on in blue;
When outpu ng hot water, the indicator ring turns on in red;
Under non-water output state, if the hot water is in the unlocking state, the indicator ring flashes
in red.
3. Digitron
Under non-water output state, the digitron displays me;
Under the water output state, the digitron displays the water output temperature, when
outpu ng hot water, it displays the temperature of hot water, when outpu ng cold water, it
displays the temperature of cold water;
4. Steps for adjus ng me:
Hold the "Hot Water" and "Cold Water" keys for 3 seconds, the digitron flashes in 8888 and enters
into the me adjustment state;
Under the me adjustment state, press the "Hot Water" key, the hour flashes in 88, the minute
keeps on in 88, and the product enters the hour adjustment mode, at this me, hour can be
adjusted by pressing "-"/"+" keys, the hour adjustment range is 0-23;
Under the me adjustment state, press the "Cold Water" key, the minute flashes in 88, the hour
keeps on in 88, and the product enters the minute adjustment mode, at this me, minute can be
adjusted by pressing "-"/"+" keys, the minute adjustment range is 0-59;
A er adjus ng, hold the "Hot Water" and "Cold Water" keys for 3 seconds, the digitron stops
flashing, the product exits the me adjustment state, and displays normally;
Note: Temperature is displayed in Fahrenheit;
Time has memory func on in case of power failure;
Control panel
1.
“
”
Blue snowflake indicates the dispenser is cooling water.
2.
“
”
Red wavy lines indicate the dispenser is hea ng water.
3.
“
“Blinking orange bo le icon indicates the bo le is empty.
4.
“
”
Clock displays current me.
5.
“
”
The icon is "adjust add key”.
6.
“
”
The icon is "adjust minus key"
7.Displays water temperature inside the water reservoir while
dispensing.
5. A er powering on, the panel border indicator ring flashes for 3 mes (once/1 second) in blue
and red alternately, 3s later, all indicators display normally (display according to the current
state of the product);
6. In the power-on state, the digitron displays me.
7. A er powering on, when the machine heats water for the first me, it will judge the al tude
environment. The process is as follows:
8. During hea ng, when the temperature of water in the hot water tank exceeds 80
℃
, the system
starts sampling ming and judges the current water temperature once every 15 seconds. If
the water temperature of 16 consecu ve mes (4 minutes) is 80
℃
-90
℃
, it will be judged as the
plateau environment, then the heat preserva on point is set to 83
℃
and the star ng point is
set to 73
℃
, the boiling point judgment is over;
5