
EN - 27
7.
XỬ LÝ SỰ CỐ
Máy sấy của bạn đã được trang bị hệ thống giúp liên tục kiểm tra trong quá trình sấy để
thực hiện các biện pháp cần thiết và cảnh báo bạn trong trường hợp có bất kỳ sự cố nào.
CẢNH BÁO
:
Nếu sự cố vẫn tiếp diễn ngay cả khi bạn đã áp dụng các bước trong phần
này, vui lòng liên hệ với đại lý của bạn hoặc Nhà cung cấp dịch vụ được ủy quyền. Đừng
thử sửa chữa bằng sản phẩm phi chức năng
SỰ CỐ
LÝ DO
GIẢI PHÁP
Quá trình sấy khô sẽ diễn ra
trong một thời gian dài.
Bề mặt của bộ lọc xơ vải có thể bị
nghẽn.
Hãy rửa ống xả bằng nước ấm.
Bộ trao đổi nhiệt có thể bị tắc
nghẽn.
Hãy làm sạch bộ trao đổi nhiệt
Các tấm thông gió phía trước
máy có thể bị đóng.
Mở cửa / cửa sổ để ngăn nhiệt độ
phòng tăng quá mức.
Có thể có một lớp cặn vôi trên cảm
biến độ ẩm.
Hãy làm sạch cảm biến độ ẩm.
Máy sấy có thể bị quá tải đồ giặt.
Đừng làm quá tải máy sấy.
Đồ giặt có thể không được quay
kỹ.
Hãy chọn tốc độ quay cao hơn
máy giặt của bạn.
Laundry comes out damp at the end
of the drying process.
Quần áo giặt ra bị nóng vào cuối quá trình sấy thường sẽ cảm
thấy bị ẩm ướt hơn.
The programme used might not be
suitable for the type of laundry.
Check the care labels on the
laundry items, select a suitable
programme for the type of laundry
and additionally, use the time
programmes.
The surface of the lint filter might be
clogged.
Wash the filter with lukewarm water.
The heat exchanger might be
clogged.
Clean the heat exchanger
The dryer might be overloaded with
laundry.
Do not overload the dryer.
The laundry might be insufficiently
spun.
Select a higher spin speed on your
washing machine.
The dryer cannot be opened or the
programme cannot be started. The
dryer does not get activated when
adjusted.
The dryer might not be plugged in.
Make sure that the plug is fitted in
the socket.
The loading door might be open.
Make sure that the loading door is
properly closed.
You might not have set a
programme or pressed the Start/
Pause key.
Make sure that the programme has
been set and the dryer is not in the
Standby (Pause) mode.
Child lock might be active.
Deactivate the child lock.
The programme has been
interrupted for no reason.
The loading door might not be
closed properly.
Make sure that the loading door is
properly closed.
There might have been a power
failure.
Press the Start/Pause key to start
the programme.
The water tank might be full.
Empty the water tank.