Malloca MIR 593, Instruction Manual, Page: 8 / 20

8
signal tone.
The Touch control may only be switched on by pressing the power key, the control unit is not
switched on.
In case of an active “Child Lock Function” when switching power on, all cooking zone displays
show “L” for Locked. Possible optic warnings for hot cooking zones [H] are displayed in alternation
with [L]
By pressing the ON/OFF key (1) of the control unit in ON-Mode, the Touch Control may be
switched off at any time.
Automatic Switch Off
When the control is ON it automatically switches-OFF after 20 seconds. After selecting a cooking
zone, the automatic off time is divided into 10 seconds, after wwhich the zone iss deselected and,
after another 10 seconds, the touch control switches off.
The Touch Control switches from Power On to Off after 20 seconds provided that no cooking
zoone is activated or a select key is pressed during that time.
In case of a selected cooking zone (with cooking stages is “0”) this Auto Power off time is
composed of a 10 seconds deselection time and 10 seconds power off time.
Switching a cooking zone ON and OFF
In case of on state of the Touch Control a cooking zone may be selected by touching the dedicated
display (Select Sensor (8)). The respective display changes to a steady display dot and “0” instead of
“H” – in case of a hot cooking zone. On all other cooking zone displays the dot expires.
That followed a cooking level maybe set by using the Slider area. End stops are “9” (right side)
and “0” (left side).
Switching a cooking zone off
A single cooking zone may be switched off by selecting and setting cooking level to “0”. In case of
an optic warning for hot cooking zones “H” this is displayed in alternation with “0” and the
synchronously display dot.
After the Touch control is switches off the display remains black respectively “H” is displayed for
an optic warning for hot cooking zone.
Switching-OFF all cooking zones
Immediately switching off all cooking zones is always possible by using the On/Off key. “H”
possibly appears on all hot cooking zones. All other cooking zone displays remain black.
Setting level
The cooking zone can be set to 9 levels that are indicated by the numbers “1” to “9” on the seven-
segment LED display.
Residual heat indicator
It is meant to indicate to the user that the glass ceramic has a dangerous touch temperature in the
circumference of a cooking zone. The temperature will be determined following a mathematical
model and the remaining residual heat will be indicated by means of “H” on the corresponding
display.
Heating-up and cooling down will be calculated dependent on:
-
The selected setting („0“ to „9“)
-
The ON/OFF time.
After switching-OFF the cooking zone the respective display shows “H” until the assigned cooking
zone temperature is mathematically in a uncritical level (<60°C).
Automatic power OFF function (operating time limitation)
Dependent on the selected setting, every cooking zone will be switched-OFF after a defined
maximum operation time if no operation of the assigned cooking zone follows within this time
period. Every change of the cooking zone condition (by means of the PLUS+, MINUS-, or dual zone)
puts back the maximum operation time of this cooking zone to the initial value of the operating time
limitation.