11. Displaying software versions
The sequence to show the software version is:
•
During the first 30 seconds after plugging the appliance
•
The Touch has to be unlocked and all Heaters Off
Pressing at the same time right rear heater selection key and the [+] key, the Induction microcontroller 1 software
version is shown.
Pressing at the same time right front heater selection key and the [-] key, the Induction microcontroller 2 software
version is shown.
Fig. 28.: Showing induction software versions
Pressing at the same time right heater selection keys the TouchMerke user interface software version is shown.
Fig. 29.: Showing user interface software versions
A beep sounds and the rear heater displays show the software version. Software version is composed of two parts:
functional part and safety part. To distinguish between the two parts, when safety version is shown the dots of the displays are
activated.
The message is kept for 10 seconds or until any key or combination of keys is touched. When the message disappears
a beep sounds and the user can continue with normal operation.
19
Displaying software versions