When the heater selection finishes, if all the heaters are off, all the heater displays will show the digit point, waiting a
heater selection.
Fig. 8.: Selected cookset 0 for all the heaters. Heater selection finished
4.2. Selecting a power level for a heater
Once the heater is selected, the power level can be selected by touching the [-][+] keys. In each increase/ decrease a
beep sounds and the corresponding display shows the new power level.
Touch MERKE sends the new power level to the Control Unit.
The [-][+] keys will be locked:
o
If no heater is selected, or
o
if the key lock is activated (KEYLOCK LED on), or
o
if there is any heater error.
If the finger is held down on the key, the action is repeated twice every second. The [+] key raises the cooking level to
9, whereas the [-] key reduces the cooking level to 0.
Fig. 9.: Selecting a cookset for a heater
10
Fig. 7.: Selected cookset 0. Heater selection finished
Switching On
a Heater