every four months. The saturation of the active carbon filter depends on the
frequency of use of the appliance, by the type of cooking and the regularity
of cleaning the antigrease filters. (Fig.14) To remove the charcoal filters
place on hand on one filter at a time and turn it toward the front part. The
charcoal filter can now be removed. Always ensure to replace both filters at
the same time.
•
Clean the fan and other surfaces of the cooker hood regularly using a cloth
moistened with denatured alcohol or non abrasive liquid detergent.
•
The illumination installation is designed for use during cooking and not for
prolonged general illumination of the environment. Prolonged use of the
illumination installation notably reduces the duration of the bulb. Use a
one-edged screwdriver or any other appropriate tool to lift and remove the
overhead light fixture. Replace the damaged lamp. Use only halogen lamps
as the original specification, avoiding contact with hands. Return the light
fixture to its position (snap fastening). (Fig. 15)
•COMMANDS:
(Fig.16)
A= Timer (automatic shut off)
B= Speed 1 / adjust / switch off
C= digital display screen (showing timer and speed)
D= Speed 3 / adjust / switch off
E= Light
When pushing A, digital display screen shows "15 minutes" for timer, and
the minutes can be adjusted by pushing " " or " " on B and D. And the first
speed is on, pushing A once to switch off, the digital display shows "00".
When pushing B, it shows "F1" on the digital display screen, and the first
speed is on. Pushing B once to switch off, and the digital display shows "00".
When pushing D, it shows "F3" on the digital display screen, and the third
speed is on. Pushing D twice to switch off, and it shows "00" on the screen.
The second speed F2 and Turbo speed F4 can be adjusted by pushing B or D.
When pushing E, the buttons light is on and the light is on, only push E once
again to switch off the light.
If the motor, light are working together, or only motor is working, pushing A,
automatic switch off timer is on, and it will delay 15 minutes to turn off the
motor and light. To push B or D to adjust the time, and to pust A again to stop
the timer.
