Malloca K1153, User Manual

Page: 21 / 27

3.
Dig display You can follow which speed the product is cur-
rently working on this display.Fig. 15
4.
Press this button to increase the motor speed.Fig. 15
5.
When timer button is pressed, a 15-minute timer function will
be activated; display will give a signal once the timer starts
and the motor will stop automatically after 15 minutes.Fig. 15
6.
Press this button to turn on and off the lamp.Fig. 15
Filters should be cleaned when "C" signal appears on the Display
or (due to usage) every 2 or 3 weeks. To delete "C" signal after the
filters are cleaned and replaced, press and hold ( ) button more
than 3 secs (when device is off). Letter "E" will appear on the Dis-
play and it will switch to normal operation. If operation before
deleting the "C" signal is required, active motor speed will appear
for 1 sec when you press ( ) button and then the motor will
resume running.
11.3 Slıder Rocker Product Use
1.
Bring to this position to turn off the lamp (Fig. 16).
2.
Bring to this position to turn on the lamp ( Fig. 16 ).
3.
Bring to this position to turn off the lamp (Fig. 16).
4.
Bring to this position when you want to operate the product in
1. speed ( Fig. 16 ).
5.
Bring to this position when you want to operate the product in
2. speed ( Fig. 16 ).
6.
Bring to this position when you want to operate the product in
3. speed ( Fig. 16 ).
Cleaning Periods for Metal Filters
0 1 2 3
1 2 3 4 5
6
Fig. 16
USE OF PRODUCT
Slıder Rocker Product Use
16.10.2018 HOOD USER GUIDE ENGLISH 21