Malibu Boats Wakesetter 20VTX 2018, Owner'S Manual

Page: 79 / 200

Malibu Owners Manual • 2018 • Dashes and Video Screens • Page 3-10
Jump Mode:
Touch JUMP to have the lighting cycle through multiple colors.
Select between four or seven different colors with the 4 and 7 buttons. Touch
the BRIGHTNESS sliders to control the brightness level of the lighting, and
the SPEED slider for the rate of cycling.
SETTINGS SCREEN
Touch the SETTINGS button on the CONTROLS page to manage the system
settings, options, troubleshooting, and software updates here. View the available
settings list with the scroll bar on the right side of the screen, and touch an item
on the list to view available settings choices. Touch the red “X” button to exit the
SETTINGS screen. Changes will automatically be saved upon leaving the SETTINGS
screen.
Manage Settings:
Touch PERFECT PULL to enable Bluetooth and pairing with
the PERFECT PULL app, and to edit the name of the Bluetooth device on the
boat. When pairing a device to the boat, the default Bluetooth name is “ViperII”,
but after pairing the name changes to “Malibu Boat”. Use the app to create and
share rider preset remotely, and provide streaming audio on-board with an iOS
or Android device.
Touch ABOUT [UPDATE] to view the installed software version and
instructions for how to install a software update here.
Touch BACKLIGHTING to adjust the brightness setting from 0-100% of the display in daytime and night modes with the slide
bar controls. The night button on the display toggles between the two settings.
Touch GPS to change the speed signal source from ZeroOff to PADDLEWHEEL.
The default is ZeroOff. The boat must be at idle throttle when changing this
setting.
Touch THROTTLE to change the throttle sensitivity from REGULAR to
AGGRESSIVE.