Small piece of
waste wood
Insert drawer
Lift front of drawer whilst
inserting to overcome
the ‘stop’ system.
Note:
To ensure that
your drawer runs
smoothly, spray a small
amount of furniture
polish into the grooves.
Assembly Instructions
17
Step
28
Small piece of
waste wood
Drill a handle hole in
each short door
Important:
Please follow
these instructions
carefully.
Lay the 2 short doors
down onto a smooth
surface.
Check that the hinges
and holes are in the
same place as the
diagrams.
Note:
We recommend
the use of a small piece
of waste wood, placed
behind the hole while
drilling, to reduce the
possibility of any
breakout.
Using the pilot hole in
the rear face of the door,
drill through the hole
indicated opposite, using
a 2.5mm diameter drill.
Turn the door over and
open out the 2.5mm hole
that you have just drilled
by drilling back through it
with a 5mm drill.
IMPORTANT
Carefully choose which hole you
need to drill in each short door
19
ONLY drill this hole
in 1 short door
This will be the
left short door
ONLY drill this hole
in 1 short door
This will be the
right short door
19
19
