16
Tx Rx
PAIRING
DEFAULT
AA ALKALINE
AA ALKALINE
AA ALKALINE
USE 3 x AA
ALKALINE BATTERY
+
-
USE 3 x AA
ALKALINE BATTERY
+
-
USE 3 x AA
ALKALINE BATTERY
+
-
OPEN
SEE INSTRUCTIONS
FOR USE
SOUND
SELECTION
SWITCHES
ON
1 2 3 4 5 6 7 8 9 10
Malem
©
Universal
©
Wireless Alarm Receiver
Use Alkaline batteries ONLY
MODEL MO15 (Rx)
Tx Rx Pairing
To reset and erase all pairing memory use
paper clip. Insert the end of a paper clip into
the hole. Only use default to erase all pairing
memory. Press and hold for 3 seconds. All
pairing with Tx will be lost.
To open battery
compartment
place slotted
screwdriver in the
slot then twist.
Batteries: 3 x AA
Please use
alkaline. Observe
correct polarity.
Make sure metal
contacts are
clean.
Tx Rx Pairing.
Use end of paper
clip. Pass into hole,
press and release,
all red LEDs On,
activate required Tx
while red LEDs are
On, one of the LEDs
will flash the same
number as the
switch number
selected on Tx.
Sound selection
switch
Switch 1 - 8 will
select sounds 1 - 8.
Switch 9 must be
off for single sound.
For 8 sounds switch
1 as well as 9 and
10 must be On.
Sounds will be Off if
switch 10 is in the
Off position.
ON
1 2 3 4 5 6 7 8 9 10
OFF
6492 Master IBooklet 061010_Master IBooklet 061010 21/01/2011 14:45 Page 18
