MANTHER GROWL MANUAL V.1
PG. 4
GETTING STARTED
To get right into your first patch, patch from the VCA OUT which is at the end of the signal flow
(post VCA audio output). Make sure your VCA LEVEL is up as well as CUTOFF if you’re going
from the VCA OUT.
Turn up the VCF Filter cutoff control per diagram, set the manual controls for the Square, Saw,
and Tri-Shape controls. Dial the Pulse Width control to 12 o’clock. Sweep the SHAPE
(waveshape) control left to right.
PG. 4
