w w w . m a l c o t o o l s . c o m
Use
#6 Tool
to shorten
length of
duct section,
by measuring
from outside
edge of material
to be scrapped.
Use knob
under handle
to raise or
lower blade
and adjust
depth of cut.
• 1” FasGroov kits also include a #6 tool (Tan
color coded FGV6) for creating duct sections
less than standard 4 foot lengths. The #6
replaces a shiplap knife for making a shiplap
groove at fitting end prior to closure of duct
section. The #6 may also be used for two-
piece and four-piece ductboard fabrication.
1/2”
FGV6
Easy one-piece layout:
•
FasGroov Square permits fast and accu-
rate layout without marking cuts or cal-
culating add-on dimensions. Lay out duct-
board as you cut. Simply align dimension on
FasGroov Square with edge of previous cut
and move across the board. Square is also
easily adjustable for angled cuts.
Single blade knives:
•
Single blade FasGroov Knives are safer to
use and also feature comfortable molded
handles. Male and Female Shiplap Knives
can be used on closed duct sections.
FGK
Duct Knife
use this point to
cut fiberglass without
tearing ductboard skin.
4
