USER INSTRUCTIONS
1. Drill the holes for the
screws. Screw diameter is
4 mm. Only for brick and
concrete walls!
4. Plug the solar panel’s
cable into the DC port
shown above. A red
indicator light shines for 2
seconds showing you that
the operation has been
completed successfully.
2. Push the anchors in the
holes. Only for brick and
concrete walls!
5. Turn on the light by
pressing the ON/OFF
button one time (100%
power). 2nd click on the
ON/OFF button activates
50% power mode, 3rd
click activates 30% + 100%
motion sensor mode,
while 4th click turns the
light OFF.
3. Lift the light in place,
and drive in the screws by
a screwdriver.
6. You can customize your
light’s operation by the
remote control unit.
6
Summary of Contents for SUNSTONE TRAVELLER 600
Page 2: ...2 ...
