background image

1

2

3

4

5

6

PRODUCT STRUCTURE, CONTENT OF THE BOX

ATTENTION! The performance of the battery may drop below 0 Celsius, and 

above 40 Celsius temperatures.

ATTENTION! When using or storing your light, please always keep the protective 

rubber cover of the ports well attached to the ports (if none of the ports are 

used currently)!

Content of the box:

1. 

Sunstone Traveller 600 light

2. 

Solar panel + 5 m cable + 2 stands

3. 

Wall 4 m cable

4. 

Remote control unit

5. 

4 Screws & anchors for fixing the light,

 

2 screws & anchors for fixing the wall switch

Product structure:

Connection diagram:

1. 

ON/OFF button (100% power - 50% power - 30% power + 100% power 

by motion sensor - OFF)

2. 

External USB 5V, 2A port to be used as power bank for charging USB 

devices (tablets, smartphones etc.) 

3. 

DC port for connecting the plug of the wall switch 6.

4. 

DC port for connecting the plug of the solar panel cable 

5. 

Motion (PIR) sensor (2 options by remote control: 0% +100% for 24 

hours, 30%+100% for 12 hours)

6. 

Wall switch for optional control of the light (with the same 

functions as ON/OFF button)

Solar panel cable (5 m)

Wall switch cable (4 m)

Wall switch

Power bank function

through the external USB port

Remote

control

4

Summary of Contents for SUNSTONE TRAVELLER 600
















Reviews: