PRODUCT INSTALLATION AND OPERATION INSTRUCTIONS
Please pay attention to place your light in a non-shaded place with
sufficient sunshine provided for its operation.
Installation options:
Installation & start-up of the light:
1.
Turn ON the light by pressing the ON/OFF button.
2.
Place the light on the pole (the pole is not the part of the package).
Please care about choosing the right material, and wall width for the
pole you are about to use, and also please pay attention for the right
fixing method of the pole into the ground/onto the chosen hard surface
to avoid accidents. Please care to set up the column exactly vertical from
all views. The diameter of the column should be below 60 mm (2.36”).
The recommended installation height is 3-4 m, while the recommended
distance between the poles is 9-12 m if multiple lights are installed.
3.
Drive in the tightening bolts until you can, then tighten them further
with a 6 mm allen key. ATTENTION! Do not overtighten the bolts! You
can adjust the vertical angle of the light head by loosening the bolt of
the shaft with a 14 mm allen key. When you are ready with the angle-
adjustment, please do not forget to tighten the 14 mm bolt (do not
overtighten)!
A: Vertical installation mode
(directly onto the column)
B: Slanting installation mode
(onto a slanting console
on the column)
5
Summary of Contents for Solarway 10
Page 2: ...2 ...
