B
08.06
49
CHAPTER
PAGE
ISSUE
ELECTRIC SYSTEM TROUBLESHOOTING
ENGLISH
SECTION 2
Signal System
SECTION 2
B
- TROUBLESHOOTING
SECONDARY MENU FUNCTIONS (SUBMENU)
The “secondary menu” includes all the functions that are displayed by the bar graph. You can choose which
information to display by pressing the MODE button and following the instructions given in the paragraph
describing the function of the button itself. The bar graph is divided into 2 sections: the first section (bottom
part) is composed of 8 segments
and is located on the left side of the display. Segments are vertical. The
second section (top part) is composed of 10 segments and is located at the top of the display. Segments are
horizontal. Reference headings and icons appear when the function is displayed
1.
RPM indicator function
This information is displayed by the entire bar graph
(18 segments) and is accompanied by the heading
RPM appearing on the top right of the top section
of the bar.
Information is updated every 0.33 sec. and is
controlled in accordance to the following table:
rpmx100
[RPM]
0
up to 14
from 15 to 17
from 18 to 20
from 21 to 23
from 24 to 29
from 30 to 35
Active
seg.
0
1
2
3
4
5
6
rpmx100
[RPM]
from 36 to 41
from 42 to 47
from 48 to 53
from 54 to 61
from 62 to 67
from 68 to 73
from 74 to 79
Active
seg.
7
8
9
10
11
12
13
rpmx100
[RPM]
from 80 to 85
from 86 to 91
from 92 to 93
from 94 to 95
from 96 to 97
over 97
Active
seg.
14
15
16
17
18
18+over
boost
When a speed of 9700 RPM is reached, the
instrument will display the message
OVERBOOST above the top section of the bar
graph, on the right.
RPM - OVERBOOST function
