Malaguti Centro 125, Service Manual

Page: 65 / 79

64 11/07
125 i.e. - 160 i.e.
F. 162
D
45 ± 15%
• Unscrew the nut (D) and slide off the pin (A).
FRAME SIZE CHECK
• In case of suspected deformation (even slight) of the frame following an
accident, perform a size check of the frame.
Check that the distance A = 1168 mm ( ± 2mm tolerance)
• If it results to be outside of the tolerance, replace the frame.
It is absolutely forbidden to deform the frame to restore the
original distance (A).
Raise the rear part of the motorcycle before
sliding off the engine pin. It is advisable to have
a second operator available to help carry out this
operation.
Removing the engine from the frame is a task
that should be performed with care and the
utmost attention, in order to avoid crushing of
the hands, lower limbs and safeguard the
integrity of the engine.
The removal of parts and components that allow the engine to be
separated from the frame includes a certain number of bands being
cut. These must be replaced and positioned as they were originally.
For this purpose, consult the illustrations on the following pages.
F. 163
F. 161
A
D