background image

 

 

WARNINGS 

 

Before starting the vehicle, be sure that the clamps are connected in 
the right way and the green indicator light is on. 

  This Jumpstarter contains components that tend to produce arcs or 

sparks. To prevent fire or explosion, do not operate the Jumpstarter in 
locations containing batteries or flammable materials, or in locations 
that require ignition-protected equipment. 

 

This product contains a sealed, non-spillable lead-acid battery which 
must be recycled or disposed of properly. 

  Working in the vicinity of a lead-acid battery is dangerous. During 

normal operation, this type of battery releases hydrogen gas which is 
explosive and poisonous.  Before using the unit, you must carefully 
read and follow these instructions and those published by the 
manufacturer of the battery or any equipment you intend to use in the 
vicinity of the battery. 

 

Protect the unit from direct sunlight or excessive heat and moisture. 

 

This unit contains electrical circuitry that is not water-resistant. Do not 
submerge the unit in water. 

 

Never attempt to jump start or re-charge a frozen battery. 

 

The jump start power switch controls power to the output terminals. To 
prevent accidental shorting, keep this switch in the off position for all 
operations, unless for jump starting or using the outing terminals to 
power a 12V DC appliance. 

 

Do not smoke, use matches or cigarette lighter, or allow any spark or 
flame near battery or engine. 

 

Put the clamps back on the holder after use to avoid sparking. 

 

4.  FEATURES 

 

 

Front view 

Summary of Contents for 710035











Reviews: