Maktec MT400 Instruction Manual Download Page 6

6

FUNCTIONAL 
DESCRIPTION

CAUTION:

Always be sure that the tool is switched off and unplugged before
adjusting or checking function on the tool.

Switch action

CAUTION:

Before plugging in the tool, always check to see that the switch trigger
actuates properly and returns to the “OFF” position when released.

To start the tool, simply pull the switch trigger. Release the switch trigger to
stop.
For continuous operation, pull the switch trigger and then push in the lock but-
ton.
To stop the tool from the locked position, pull the switch trigger fully, then
release it.

Air volume adjusting dial

Air speed and volume can be adjusted without positive stops by turning the air
volume adjusting dial

To obtain high speed and increase volume, turn the air volume adjusting dial to
the A direction shown in the figure (for the bigger number). Turn the air volume
adjusting dial to the B direction (for the smaller number) to obtain low speed
and to decrease the air volume

ASSEMBLY

CAUTION:

Always be sure that the tool is switched off and unplugged before
carrying out any work on the tool.

Installing or removing the nozzle

Align the pin protruding inside the nozzle with the notch on the tool, push the
nozzle to the blower outlet and then securely turn the nozzle clockwise.

To remove the nozzle, turn counterclockwise and pull it out.

1. Switch trigger

2. Lock button

1

2

006293

1. Air volume adjusting dial

1

B

A

006294

1. Nozzle

2. Pin

3. Blower outlet

4. Notch

1

2

3

4

006295

Summary of Contents for MT400









Reviews: