Maktec MT400 Instruction Manual Download Page 2

2

SPECIFICATIONS

• Due to our continuing programme of research and development, the specifications herein are subject to change

without notice. 

• Note: Specifications may differ from country to country.

SYMBOLS

END201-1

The following show the symbols used for the tool. Be
sure that you understand their meaning before use.

...................Read instruction manual.

...................DOUBLE INSULATION

Intended use

The tool is intended for blowing dust.

Power supply

The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.

For European countries only

Noise and Vibration

The typical A-weighted noise levels are
sound pressure level: 89 dB (A)
sound power level: 100 dB (A)
Uncertainty: 3 dB(A)

– Wear ear protection. –

The typical weighted root mean square acceleration

value is not more than 2.5 m/s

2

.

These values have been obtained according to
EN60745.

EC-DECLARATION OF CONFORMITY

We declare under our sole responsibility that this product
is in compliance with the following standards of stand-
ardized documents,  EN60745, EN55014, EN61000 in
accordance with Council Directives, 73/23/EEC, 89/336/
EEC, 98/37/EC.

Yasuhiko Kanzaki 

CE 2005

Director

MAKITA INTERNATIONAL EUROPE LTD.

Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND

Responsible manufacturer:

Makita Corporation Anjo Aichi Japan

Model

MT400

Capacities

Max. air volume

1.3 - 2.4 m

3

/min.

No load speed (min

-1

)

8,500 - 16,000

Overall length

428 mm

Net weight

1.3 kg

Safety class

 /II

Summary of Contents for MT400









Reviews: