6
For tool with mini planer blades
1.
Remove the existing blade, if the tool has been in use, carefully clean the
drum surfaces and the drum cover. To remove the blades on the drum,
unscrew the three installation bolts with the socket wrench. The drum
cover comes off together with the blades.
2.
To install the blades, loosely attach the adjusting plate to the set plate
with the pan head screws and set the mini planer blade on the gauge
base so that the cutting edge of the blade is perfectly flush with the inside
flank of the gauge plate.
3.
Set the adjusting plate/set plate on the gauge base so that the planer
blade locating lugs on the set plate rest in the mini planer blade groove,
then press in the heel of the adjusting plate flush with the back side of
the gauge base and tighten the pan head screws.
4.
It is important that the blade sits flush with the inside flank of the gauge
plate, the planer blade locating lugs sit in the blade groove and the heel
of the adjusting plate is flush with the back side of the gauge base.
Check this alignment carefully to ensure uniform cutting.
5.
Slip the heel of the adjusting plate into the groove of the drum.
6.
Set the drum plate over the adjusting plate/set plate and screw in the
three hex flange head bolts so that a gap exists between the drum and
the set plate to slide the mini planer blade into position. The blade will be
positioned by the planer blade locating lugs on the set plate.
7.
The blade’s lengthwise adjustment will need to be manually positioned
so that the blade ends are clear and equidistant from the housing on one
side and the metal bracket on the other.
8.
Tighten the three hex flange head bolts (with the socket wrench pro-
vided) and rotate the drum to check clearances between the blade ends
and the tool body by hand.
9.
Check the three hex flange head bolts for final tightness.
10. Repeat procedures 1 - 9 for other blade.
1. Pan head screw
2. Adjust plate
3. Planer blade locating lugs
4. Gauge plate
5. Heel of adjust plate
6. Set plate
7. Inside flank of gauge plate
8. Gauge base
9. Back side of gauge base
10.Mini planer blade
004841
1
2
3
4
5
6
7
8
9
10
002565
1. Mini planer blade
2. Groove
3. Set plate
4. Hex. flange head bolt
5. Drum plate
6. Drum
1
2
3
4
5
6
002566
Summary of Contents for MT190
Page 12: ...Makita Corporation 884522A6...