Maktec MT190, Instruction Manual

Page: 2 / 12

2
SPECIFICATIONS
• Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
SYMBOLS
END201-1
The following show the symbols used for the tool. Be
sure that you understand their meaning before use.
...................Read instruction manual.
...................DOUBLE INSULATION
Intended use
The tool is intended for planing wood.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
Model MT190
Planing width 82 mm
Planing depth 1 mm
Shiplapping depth 6 mm
No load speed (min
-1
)
16,000
Overall length 290 mm
Net weight 2.5 kg
Safety class
/II