Maktec 5606B Instruction Manual Download Page 7

For straight cuts, align the A position on the front of the 
base with your cutting line. For 45° bevel cuts, align the B 
position with it. 

Switch action 

1

2

 

 

012127 

CAUTION: 

• 

Before plugging in the tool, always check to see 
that the switch trigger actuates properly and returns 
to the "OFF" position when released. 

For tool with lock button 

To start the tool, simply pull the switch trigger. Release 
the switch trigger to stop. 
For continuous operation, pull the switch trigger and then 
push in the lock button. 
To stop the tool from the locked position, pull the switch 
trigger fully, then release it. 

For tool with lock-off button 

To prevent the switch trigger from being accidentally 
pulled, a lock-off button is provided. To start the tool, 
push in the lock-off button and pull the switch trigger. 
Release the switch trigger to stop. 

For tool without lock button and lock-off button 

To start the tool, simply pull the switch trigger. Release 
the switch trigger to stop. 

ASSEMBLY 

 

CAUTION: 

• 

Always be sure that the tool is switched off and 
unplugged before carrying out any work on the tool. 

Removing or installing saw blade 

1

2

 

 

004091 

CAUTION: 

• 

Be sure the blade is installed with teeth pointing up 
at the front of the tool. 

• 

Use only the Makita wrench to install or remove the 
blade. 

To remove the blade, press the shaft lock so that the 
blade cannot revolve and use the wrench to loosen the 
hex bolt counterclockwise. Then remove the hex bolt, 
outer flange and blade. 
To install the blade, follow the removal procedure in 
reverse. BE SURE TO TIGHTEN THE HEX BOLT 
CLOCKWISE SECURELY. 

1

2

3

4

 

 

004092 

1

2

3

4

5

 

 

011230 

The inner flange has a certain diameter protrusion on 
one side of it and a different diameter protrusion on the 
other side. Choose a correct side on which protrusion fits 
into the saw blade hole perfectly. 
Next, mount the inner flange onto the mounting shaft so 
that the correct side of protrusion on the inner flange 
faces outward and then place saw blade and outer flange.   
BE SURE TO TIGHTEN THE HEX BOLT CLOCKWISE 
SECURELY. 

 

CAUTION: 

• 

Make sure that the protrusion "a" on the inner 
flange that is positioned outside fits into the 
saw blade hole "a" perfectly.

 Mounting the blade 

on the wrong side can result in the dangerous 
vibration. 

 
 
 
 
 
 
 

1. Mounting shaft 
2. Inner flange 
3. Saw blade 
4. Outer flange 
5. Hex bolt 

1. Hex bolt 
2. Outer flange 
3. Saw blade 
4. Inner flange 

1. Hex wrench 
2. Shaft lock 

1. Switch trigger 
2. Lock button / 

Lock-off button

Summary of Contents for 5606B













Reviews: