Maktec 5606B Instruction Manual Download Page 2

ENGLISH (Original instructions) 

SPECIFICATIONS 

Model 5606B 

5806B 

Blade diameter 

160 mm 

185 mm 

at 90° 

55 mm 

66 mm 

Max. cutting depth 

at 45° 

36 mm 

44 mm 

No load speed (min

-1

) 5,200 

5,200 

Overall length 

268 mm 

282 mm 

Net weight 

3.4 kg 

3.4 kg 

Safety class 

/II 

/II 

• Due to our continuing program of research and development, the specifications herein are subject to change without notice. 
• Specifications may differ from country to country. 
• Weight according to EPTA-Procedure 01/2003 

 

END201-5 

Symbols 

The following show the symbols used for the equipment. 
Be sure that you understand their meaning before use. 

  Read instruction manual. 

 

 DOUBLE 

INSULATION 

 

  Only for EU countries 

Do not dispose of electric equipment 
together with household waste material! 
In observance of European Directive 
2002/96/EC on waste electric and 
electronic equipment and its 
implementation in accordance with 
national law, electric equipment that 
have reached the end of their life must 
be collected separately and returned to 
an environmentally compatible recycling 
facility. 

ENE028-1 

Intended use

 

The tool is intended for performing lengthways and 
crossways straight cuts and mitre cuts with angles in 
wood while in firm contact with the workpiece. 

ENF002-2 

Power supply

 

The tool should be connected only to a power supply of 
the same voltage as indicated on the nameplate, and can 
only be operated on single-phase AC supply. They are 
double-insulated and can, therefore, also be used from 
sockets without earth wire. 

GEA005-3 

General Power Tool Safety 
Warnings 

 

WARNING Read all safety warnings and all 

instructions.

 Failure to follow the warnings and 

instructions may result in electric shock, fire and/or 

serious injury. 

Save all warnings and 
instructions for future reference. 

The term "power tool" in the warnings refers to your 
mains-operated (corded) power tool or battery-operated 
(cordless) power tool. 

Work area safety 

1. 

Keep work area clean and well lit.

 Cluttered or 

dark areas invite accidents. 

2. 

Do not operate power tools in explosive 
atmospheres, such as in the presence of 
flammable liquids, gases or dust.

 Power tools 

create sparks which may ignite the dust or fumes. 

3. 

Keep children and bystanders away while 
operating a power tool.

 Distractions can cause 

you to lose control. 

Electrical safety 

4. 

Power tool plugs must match the outlet. Never 
modify the plug in any way. Do not use any 
adapter plugs with earthed (grounded) power 
tools.

 Unmodified plugs and matching outlets will 

reduce risk of electric shock. 

5. 

Avoid body contact with earthed or grounded 
surfaces such as pipes, radiators, ranges and 
refrigerators.

 There is an increased risk of 

electric shock if your body is earthed or grounded. 

6. 

Do not expose power tools to rain or wet 
conditions.

 Water entering a power tool will 

increase the risk of electric shock. 

7. 

Do not abuse the cord. Never use the cord for 
carrying, pulling or unplugging the power tool. 
Keep cord away from heat, oil, sharp edges or 
moving parts.

 Damaged or entangled cords 

increase the risk of electric shock. 

8. 

When operating a power tool outdoors, use an 
extension cord suitable for outdoor use.

 Use of 

a cord suitable for outdoor use reduces the risk of 

Summary of Contents for 5606B













Reviews: