![MAKSPOWER HC12.8V100Ah Product Manual Download Page 11](http://html1.mh-extra.com/html/makspower/hc12-8v100ah/hc12-8v100ah_product-manual_3862852011.webp)
Manual for
RV 100 Ah
battery
Product Manual RV Battery
NO. : HC20-PKLI20011
REV
:
R1.1
10
Distributor: Bruenech AS
e-mail: [email protected]
condition, it may affect the cycle life.
➢
The lithium-ion battery charge discharge shallow is beneficial to improve the cycle
life, proposal user each discharge is put to the nominal capacity of 80%.
➢
It should be noted that the cell would be possible to be at the over-discharged
state by its self-discharge characteristics in case the cell is not used for long time.
In order to prevent over-discharging, the cell shall be charged periodically to
maintain a certain voltage range
13.2V~13.6V
, 2months one cycle
,
Over-
discharging may causes loss of cell performance, characteristics, or battery
functions. But
for battery packs with commnunication fuction, please maintain it once in 1 month.
➢
Don’t use organic solvents to clean the battery case. If for battery fire accident,
please use dry powder fire extinguisher or sand.
➢
Battery is a consumable product with limited cycle life. Please charge it in time
when the capacity can’t reach the requirement to avoid any loss of the user.
9.4 Battery Common Troubles and Solutions
◆
Battery voltage is too low after fully charged.
➢
Battery was in long-term storage with no usage, not in accordance with the
provisions for maintenance either.
Solution:
charge the battery can be solved.
➢
Battery disconnected
Solution: remove the battery to check whether the line is broken or not, the solder
joints come off or not, nickel belt breaks or not, and then repair according to the
damage situation.
➢
Protection circuit does not work
Solution: first, make sure the cable is contact with the protection circuit well, then,
observe solder is off or not. If the above conditions are normal, please test voltage
between B+/B- and P+/ P- voltage, then the board would be failed if the voltage
difference is very high. Then please do testing in detail on protection circuit, if not
pass, please change another new protection circuit.
➢
Battery suffered fierce collision, with character-external battery case damaged or