11
4.2 Angle Guide Setting
The Angle Guide (A) is used to hold and support the workpiece at the desired angle during operation.
To adjust the guide angle, simply release the handle (B) and position it at the desired angle. After
that, retighten the knob (B) to lock the angle. Make sure the angle is correct by using a template. If
necessary, adjust the pointer on the scale of the Angle Guide. Follow the next figure.
5 Operations
There are a series of operational guidelines for the MAKSIWA LD.300 sander that must be followed.
These guidelines aim to increase the life of your equipment and offer safe and risk-free work for the
operator. This product is designed to perform operations on straight, curved, radial and chamfered
parts in wood, plastics, metals and ceramics. Used correctly, you will have high performance and
precision equipment for many years free of problems and defects.
ATTENTION! Accidental contact with the sandpaper during the operation can remove parts of the
fingers or cause major injuries. Protective Gloves and Guards reduce this risk and should always be
used when operating this machine.
1.
Before making any adjustments or replacing parts of the equipment, turn off the machine and
remove the plug from the outlet.
2. Check that all screws and handles are properly tightened and secured before starting any
process. Often, due to some vibration, these parts tend to loosen on their own.
