Makook The Home Center, Setup Manual, Page: 16 / 38

Set-up My Home
– Monitoring
Before You Begin
DO NOT follow the instructions provided with your IP Cam, because they may interfere with
your My Home Monitoring service.
DO use the IP Cam’s documentation for hardware installation and description, and as a
guide to the IP Cam’s LEDs.
Set Up Your IP Cam
1. Connect your IP Cam to its power supply, and plug that into a power outlet.
2. Connect your IP Cam to the Home Center wirelessly by pressing the WPS button once
on the Home Center and hold at least 5 seconds on the camera or until the indicator
amber light starts to blink.
3.
Wait to see the “Device Configured” notification on your TV. This could take up to a few
minutes.
4. On your TV, go to My Home and choos
e “Now” to check the IP Cam video feeds.
30 31
If necessary, your Home Center will automatically update the IP Cam’s
software to its latest version. This may take up to 10 minutes if your
connection is slow. Follow the instructions shown on your TV for this
process. DO NOT disconnect or unplug the Netcam until the update is
complete. Doing so may make it unusable.