b)
Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
c)
Disconnect the plug from the power source and/or the battery pack from the power tool
before making any adjustments, changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the power tool accidentally.
d)
Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e)
Maintain power tools. Check for misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the power tool’s operation. If damaged, have
the power tool repaired before use. Many accidents are caused by poorly maintained power
tools.
f)
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g)
Use the power tool, accessories and tool bits etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed. Use of the power
tool for operations different from those intended could result in a hazardous situation.
5)
Battery tool use and care
a)
Recharge only with the charger specified by the manufacturer
.
A charger that is suitable
for one type of battery pack may create a risk of fire when used with another battery pack.
b)
Use power tools only with specifically designated battery packs. Use of any other battery
packs may create a risk of injury and fire.
c)
When battery pack is not in use, keep it away from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal objects, that can make a connection from
one terminal to another
.
Shorting the battery terminals together may cause burns or a fire.
d)
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek
medical help
.
Liquid ejected from the battery may cause irritation or burns.
6)
Service
a)
Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
SCREWDRIVER SAFETY WARNINGS
–
Hold power tool by insulated gripping surfaces, when performing an operation where the
fastener may contact hidden wiring or its own cord
.
Fasteners contacting a "live" wire may make
exposed metal parts of the power tool "live" and could give the operator an electric shock.
MAKO CORDLESS SCREW DRIVER SAFETY INSTRUCTIONS:
Recharging the Battery:
Note: The battery becomes hot while recharging. The battery supplied with this electrical
appliance only contains a test charge and must be fully charged before use.
Before following the recharging instructions, please read the safety notice
.
Caution! When you are recharging the screw driver, place it on a flame-resistant surface and
do not leave it charging for more than 5 hours. To avoid damaging it, do not charge it
excessively.
1. The charger may become slightly warm while charging, but this does not affect its performance.
2. Plug the charger jack into the charging socket (5) firmly, and allow 3 to 5 hours for the battery to
become fully charged.
3. Insert the electric plug of the charger into the wall outlet.
4. When the charging is complete, remove the charger plug from the tool’s charging socket, and
also disconnect the charger from the wall outlet.
Note
:
1. It is normal for the handle of the tool to warm up slightly during charging.
2. Disconnect the charger from the socket when not in use.