Do You Know Your Cables?
Are two ends of a common USB cable male, female or one of each?
Page 18 of 45
Central Management System
5.3.4 Environmental Alerts
Your CPE monitors its temperature, which can be affected by an external heating or cooling source.
Alert when temperature over:
Set your upper level operating temperature.
Fan speed alert:
High-capacity models contain an internal fan. Check if internal cooling fans
require monitoring.
Save when finished.
5.4
Configure > Internet >
IP Range
This page allows you to review your Public IP address settings if your ISP provides you with more than
one. The information on this window will be set by your reseller and in most cases will not require
modification.
If your ISP doesn't provide you with multiple IP addresses, this page won't be available.
5.4.1 Existing IP Ranges:
IP Range:
The subnet mask of allowable addresses in CIDR notation.
Start / End Address:
The first 3 significant numbers of the network system are used for the main
address.
Option:
Click
to delete an entry in this table.
5.4.2 Add IP Range:
Public IP Address:
Enter a new range here, or click
Single IP Mask
for a single address.
5.4.3 Public IP Address:
Public Address:
Default, or select an appropriate address from the drop-down menu.
5.5
Configure > Network >
LAN 1
Your network configuration settings are pre-configured by your reseller, therefore changes shouldn't be
necessary. But if configuration changes are necessary, we recommend keeping a record of the existing
settings so you can go back to them if the new settings don't work.
Changes to any configuration settings are to be done carefully as you could disable
communications with the Internet.
