background image

ENGLISH (Original instructions)

IMPORTANT SAFETY 
INSTRUCTIONS

WARNING:

When using electric tools, basic safety precautions should 
always be followed to reduce the risk of fire, electric 
shock, and personal injury, including the following:
1. Read this instruction manual and the charger 

instruction manual carefully before use.

2. Clean only with dry cloth.
3. Do not block any ventilation opening. Install in

accordance with the manufacturer’s instruction.

4. Do not install near any heat sources such as radiators, 

heat registers, stoves, or other apparatus (including 
amplifiers) that produce heat.

5. Only use attachments/accessories specified by the

manufacturer.

6. Unplug this apparatus during lighting storms or when

unused for long periods of time.

7. A battery operated radio with integral batteries or a 

separate battery pack must be recharged only with the 
specified charger for the battery. A charger that may
be suitable for one type of battery may create a risk of 
fire when used with another battery.

8. Use battery operated radio only with specifically

designated battery packs. Use of any other batteries 
may create a risk of fire.

9. When battery pack is not in use, keep it away from 

other metal objects like: paper clips, coins, keys, nails, 
screws, or other small metal objects that can make a
connection from one terminal to another. Shorting the 
battery terminals together may cause sparks, burns, 
or a fire.

10. Avoid body contact with grounded surfaces such as 

pipes, radiators, ranges and refrigerators. There is an
increased risk of electric shock if your body is 
grounded.

11. Under abusive conditions, liquid may be ejected from 

the battery; avoid contact. If contact accidentally 
occurs, flush with water. If liquid contacts eyes, 
additionally seek medical help. Liquid ejected from the 
battery may cause irritation or burns.

SPECIFIC SAFETY RULES

SAVE THESE INSTRUCTIONS.

FOR BATTERY CARTRIDGE

1. Before using battery cartridge, read all instructions

and cautionary markings on (1) battery charger, (2) 
battery, and (3) product using battery.

2. Do not disassemble battery cartridge.
3. If operating time has become excessively shorter, stop 

operating immediately. It may result in a risk of 
overheating, possible burns and even an explosion.

4. If electrolyte gets into your eyes, rinse them out with 

clear water and seek medical attention right away. It 
may result in loss of your eyesight.

5. Do not short the battery cartridge:

(1) Do not touch the terminals with any conductive 

material.

(2) Avoid storing battery cartridge in a container with 

other metal objects such as nails, coins, etc.

(3) Do not expose battery cartridge to water or rain. A 

battery short can cause a large current flow, 
overheating, possible burns and even a 
breakdown.

6. Do not store the tool and battery cartridge in locations 

where the temperature may reach or exceed 50°C 
(122°F)

7. Do not incinerate the battery cartridge even if it is 

severely damaged or is completely worn out. The 
battery cartridge can explode in a fire.

8. Be careful not to drop or strike battery.
9. Do not use dropped or struck battery. (Do not use a 

damaged battery.)

Features:

• AM/FM-stereo PLL Synthesized
• Large LCD display with illumination
• Manual/Preset/Scan tuning
• Rotary tuning and volume control
• 5 preset stations each band
• Time and 2 alarm timers (radio and HWS buzzer) with 

Snooze

• Adjustable sleep (auto shut off) timer
• Stereo speaker for rich sound performance
• Ultra rugged design
• Water resistant to IPX 4

For United States: 

Cautions to the user

The changes or modifications not expressly approved 
by the party responsible for compliance could void the 
user’s authority to operate the equipment. 
The equipment has been tested and found to comply 
with the limits for a Class B Digital Device, pursuant to 
part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful 
interference in a residential installation. This equipment 
generates, uses and can radiate radio frequency 
energy and, if not installed and used in accordance with 
the instruction, may cause harmful interference to radio 
communication. However, there is no grantee that 
interference will not occur in a particular installation. If 
this equipment does cause harmful interference to 
radio or television reception, which can be determined 
by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or 
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and 

receiver.

- Connect the equipment into an outlet on a circuit 

different from that to which the receiver is 
connected.

- Consult the dealer or an experienced radio/ TV 

technician for help.

Summary of Contents for XRM02











Reviews: