background image

15. 

Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing, and gloves
away from moving parts.

 Loose clothes, jewellery

or long hair can be caught in moving parts. 

16. 

If devices are provided for the connection of
dust extraction and collection facilities,
ensure these are connected and properly
used.

 Use of dust collection can reduce dust-

related hazards. 

Power tool use and care 

17. 

Do not force the power tool. Use the correct
power tool for your application.

 The correct 

power tool will do the job better and safer at the 
rate for which it was designed. 

18. 

Do not use the power tool if the switch does
not turn it on and off.

 Any power tool that 

cannot be controlled with the switch is dangerous 
and must be repaired. 

19. 

Disconnect the plug from the power source
and/or the battery pack from the power tool 
before making any adjustments, changing 
accessories, or storing power tools.

 Such 

preventive safety measures reduce the risk of 
starting the power tool accidentally. 

20. 

Store idle power tools out of the reach of
children and do not allow persons unfamiliar 
with the power tool or these instructions to 
operate the power tool.

 Power tools are 

dangerous in the hands of untrained users. 

21. 

Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts 
and any other condition that may affect the 
power tool’s operation. If damaged, have the 
power tool repaired before use.

 Many 

accidents are caused by poorly maintained power 
tools. 

22. 

Keep cutting tools sharp and clean.

 Properly

maintained cutting tools with sharp cutting edges 
are less likely to bind and are easier to control. 

23. 

Use the power tool, accessories and tool bits
etc. in accordance with these instructions, 
taking into account the working conditions 
and the work to be performed.

 Use of the 

power tool for operations different from those 
intended could result in a hazardous situation. 

Battery tool use and care 

24. 

Recharge only with the charger specified by
the manufacturer.

 A charger that is suitable for 

one type of battery pack may create a risk of fire 
when used with another battery pack. 

25. 

Use power tools only with specifically
designated battery packs.

 Use of any other 

battery packs may create a risk of injury and fire. 

26. 

When battery pack is not in use, keep it away
from other metal objects, like paper clips, 

coins, keys, nails, screws or other small metal 
objects, that can make a connection from one 
terminal to another.

 Shorting the battery 

terminals together may cause burns or a fire. 

27. 

Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If 
contact accidentally occurs, flush with water. 
If liquid contacts eyes, additionally seek 
medical help.

 Liquid ejected from the battery 

may cause irritation or burns. 

Service 

28. 

Have your power tool serviced by a qualified
repair person using only identical 
replacement parts.

 This will ensure that the 

safety of the power tool is maintained. 

29. 

Follow instruction for lubricating and
changing accessories. 

30. 

Keep handles dry, clean and free from oil and
grease. 

USB063-2 

SPECIFIC SAFETY RULES 

DO NOT let comfort or familiarity with product 
(gained from repeated use) replace strict adherence 
to grinder safety rules. If you use this tool unsafely 
or incorrectly, you can suffer serious personal 
injury. 

1. 

Always use proper guard with grinding wheel.

 

A guard protects operator from broken wheel 
fragments. 

2. 

Accessories must be rated for at least the
speed recommended on the tool warning label.

 

Wheels and other accessories running over rated 
speed can fly apart and cause injury. 

3. 

Hold tool by insulated gripping surfaces when
performing an operation where the cutting 
tool may contact hidden wiring.

 Contact with a 

"live" wire will make exposed metal parts of the 
tool "live" and shock the operator. 

4. 

When using depressed center grinding
wheels, be sure to use only fiberglass-
reinforced wheels. 

5. 

Always use safety glasses or goggles. Ordinary
eye or sun glasses are NOT safety glasses. 

6. 

Check the wheel carefully for cracks or
damage before operation. Replace cracked or 
damaged wheel immediately. Run the tool 
(with guard) at no load for about a minute, 
holding tool away from others. If wheel is 
flawed, it will likely separate during this test. 

7. 

Use only flanges specified for this tool. 

8. 

Be careful not to damage the spindle, the
flange (especially the installing surface) or the
lock nut. Damage to these parts could result
in wheel breakage. 

Summary of Contents for XAG01












Reviews: