4 ENGLISH
3.
Follow instruction for lubricating and chang-
ing accessories.
4.
Do not modify or attempt to repair the appli-
ance or the battery pack except as indicated in
the instructions for use and care.
Cordless mixer safety warnings
1.
Hold the tool with both hands at the intended
handles.
Loss of control can cause personal
injury.
2.
Ensure sufficient ventilation when mixing flam
-
mable materials to avoid a hazardous atmo-
sphere.
Developing vapour may be inhaled or be
ignited by the sparks the power tool produces.
3.
Do not mix food.
Power tools and their accesso-
ries are not designed for processing food.
4.
Ensure that the mixing container is placed in a
firm and secure position.
A container that is not
properly secured may move unexpectedly.
5.
Follow the instructions and warnings for the
material to be mixed.
Material to be mixed may
be harmful.
6.
Do not reach into the mixing container with
your hands or insert any other objects into it
while mixing.
Contact with the mixer blade may
lead to serious personal injury.
7.
Start up and run down the tool in the mixing
container only.
The mixer blade may bend or spin
in an uncontrolled manner.
8.
Ensure that no liquid splashes against the
housing of the power tool.
Liquid that has pene-
trated the power tool can cause damage to the tool.
9.
Use auxiliary handles, if supplied with the tool.
Loss of control may cause personal injury.
10.
Hold power tool by insulated gripping sur-
faces, when performing an operation where
the cutting accessory may contact hidden
wiring.
Cutting accessory contacting a "live"
wire may make exposed metal parts of the power
tool "live" and could give the operator an electric
shock.
11.
Always be sure you have a firm footing. Be
sure no one is below when using the tool in
high locations.
12.
Hold the tool firmly.
13.
Keep hands away from rotating parts.
14.
Do not leave the tool running. Operate the tool
only when you are holding it.
15.
Some materials contain chemicals which may
be toxic. Take caution to prevent dust inhala-
tion and skin contact. Follow safety warnings
by supplier of the material.
16.
When performing the mixing operation, place
the mixing container on a flat and stable
surface.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity
with product (gained from repeated use) replace
strict adherence to safety rules for the subject
product. MISUSE or failure to follow the safety
rules stated in this instruction manual may cause
serious personal injury.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
volts
direct current
no load speed
revolutions or reciprocation per minute
Important safety instructions for
battery cartridge
1.
Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using battery.
2.
Do not disassemble or tamper with the battery car-
tridge.
It may result in a fire, excessive heat, or explosion.
3.
If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4.
If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
5.
Do not short the battery cartridge:
(1)
Do not touch the terminals with any con-
ductive material.
(2)
Avoid storing battery cartridge in a con-
tainer with other metal objects such as
nails, coins, etc.
(3)
Do not expose battery cartridge to water
or rain.
A battery short can cause a large current flow,
overheating, possible burns and even a breakdown.
6.
Do not store and use the tool and battery car-
tridge in locations where the temperature may
reach or exceed 50 °C (122 °F).
7.
Do not incinerate the battery cartridge even if
it is severely damaged or is completely worn
out. The battery cartridge can explode in a fire.
8.
Do not nail, cut, crush, throw, drop the battery
cartridge, or hit against a hard object to the
battery cartridge.
Such conduct may result in a
fire, excessive heat, or explosion.
9.
Do not use a damaged battery.
10.
The contained lithium-ion batteries are subject to
the Dangerous Goods Legislation requirements.
For commercial transports e.g. by third parties,
forwarding agents, special requirement on pack-
aging and labeling must be observed.
For preparation of the item being shipped, consulting an
expert for hazardous material is required. Please also
observe possibly more detailed national regulations.
Tape or mask off open contacts and pack up the
battery in such a manner that it cannot move
around in the packaging.
