background image

11 ENGLISH

Number

Speed

3

High

2

Medium

1

Low

NOTICE:

 

When turning the dial, be sure to com-

pletely release the switch trigger. Otherwise, the 

machine may be damaged.

OPERATION

CAUTION:

 

Do not place the machine on the 

ground while it is switched on.

 Sand or dust may 

enter from suction inlet and cause a malfunction or 

personal injury.

Blower operation

CAUTION:

 

When performing the blower 

operation, be sure to remove the dust bag from 

the machine, and attach the nozzle in place for 

blowing.

Hold the machine firmly with a hand and perform the 

blowing operation by moving it around slowly. When 

blowing around building, big stone or vehicle, direct the 

nozzle away from them. When performing an operation 

in a corner, start from the corner and then move to wide 

area.

For UB100D

For UB101D

Vacuuming operation

CAUTION:

 

When performing the vacuuming 

operation, be sure to attach the dust bag and 

nozzle in place to the machine.

CAUTION:

 

Check the dust bag frequently for 

wear or deterioration.

CAUTION:

 

Be sure to fasten the fastener of 

the dust bag before operating the machine.

CAUTION:

 

Always switch off the machine 

before opening or fastening the fastener of the 

dust bag.

NOTICE:

 

When performing the vacuuming oper-

ation, do not use the garden nozzle.

 The materials 

sucked may be clogged, and cause a malfunction of 

the machine.

NOTICE:

 

Do not allow wet materials, such as 

wet leaves, and foreign materials, such as large 

wood chips, metals, glass, pebbles, etc., to be 

sucked into the machine.

 Otherwise, a malfunction 

may occur.

NOTICE:

 

Empty the dust bag before it becomes 

full.

 Otherwise, a malfunction may occur.

Summary of Contents for UB101D















Reviews: