![background image](http://html.mh-extra.com/html/makita/ua004g/ua004g_instruction-manual_229200010.webp)
10 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
UA004G
Overall length
(without guide bar and battery)
2,516 - 3,748 mm
Rated voltage
D.C. 36 V - 40 V max
Net weight
*1
7.8 kg
*2
7.8 - 9.1 kg
Standard guide bar length
300 mm
Recommended guide bar
length
with 90PX
250 - 300 mm
with 91PX
250 - 300 mm
Applicable saw chain type
(refer to the table below)
90PX
91PX
Standard sprocket
Number of teeth
6
Pitch
3/8″
Chain speed
0 - 20 m/s
(0 - 1,200 m/min)
Chain oil tank volume
160 cm
3
Protection degree
IPX4
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
*1: Weight, with largest battery cartridge and empty oil tank, and without guide bar, chain, and shoulder harness,
according to EN ISO11680-1.
*2: The lightest and heaviest combination of weight, according to EPTA-Procedure 01/2014. The weight may differ
depending on the attachment(s), including the battery cartridge.
Applicable battery cartridge and charger
Battery cartridge
BL4020 / BL4025 / BL4040* / BL4050F* / BL4080F*
* : Recommended battery
Charger
DC40RA / DC40RB / DC40RC
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above.
Use of any other battery cartridges
and chargers may cause injury and/or fire.
Recommended cord connected power source
Portable power pack
PDC01 / PDC1200
•
The cord connected power source(s) listed above may not be available depending on your region of residence.
•
Before using the cord connected power source, read instruction and cautionary markings on them.
Summary of Contents for UA004G
