R
epair
P 5 / 11
Fig. 9
Fig. 10
Fig. 11
Fig. 11A
2. Pull hammer toward spur 32 side with "No.1R045 Gear extractor", and in order to take out steel ball 6.4
align the top of cam groove of spindle with the opening portion of hammer. See Fig. 9.
3. Loosen the handle of "No.1R045 Gear extractor" slowly until the spindle is free from the compression spring 32.
See Fig. 10. Then, the hammer section can be disassembled as illustrated in Fig. 11. And then, 31 pcs.of steel ball 3.5
and flat washer 21 can be removed from hammer as illustrated in Fig. 11A.
The top of cam groove
and
The opening portion of hammer
Steel ball 6.4
No.1R045
Gear extractor
Spindle
Spindle
Hammer
Hammer
Cup washer 19
Compression
spring 32
31 pcs. of steel ball 3.5
and flat washer 21 remain
in hammer in this stage.
31 pcs. of steel
balls 5.5
Flat washer 21
Fig. F
< Note >
Do not hold the hammer section as illustrated in Fig. F.
Because, steel balls 3.5 fall off the hammer, when separating spindle
from hammer.
