2
ENGLISH
SPECIFICATIONS
Model:
TW004G
TW005G
Fastening capacities
Standard bolt
M10 - M20
High tensile bolt
M10 - M16
Square drive
12.7 mm
No load speed (RPM)
Max impact mode
0 - 3,200 min
-1
Hard impact mode
0 - 2,600 min
-1
Medium impact mode
0 - 1,800 min
-1
Soft impact mode
0 - 1,000 min
-1
Impacts per minute
Max impact mode
0 - 4,000 min
-1
Hard impact mode
0 - 3,400 min
-1
Medium impact mode
0 - 2,600 min
-1
Soft impact mode
0 - 1,800 min
-1
Overall length
144 mm
Rated voltage
D.C. 36 V - 40 V max
Net weight
1.9 - 2.2 kg
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi
-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
BL4025 / BL4040
Charger
DC40RA
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above.
Use of any other battery cartridges
and chargers may cause injury and/or fire.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi
-
ronmentally compatible recycling facility.
Intended use
The tool is intended for fastening bolts and nuts.
Noise
The typical A-weighted noise level determined accord
-
ing to EN62841-2-2:
Model TW004G
Sound pressure level (L
pA
) : 99 dB(A)
Sound power level (L
WA
) : 110 dB (A)
Uncertainty (K) : 3 dB(A)
Model TW005G
Sound pressure level (L
pA
) : 99 dB(A)
Sound power level (L
WA
) : 110 dB (A)
Uncertainty (K) : 3 dB(A)
NOTE:
The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE:
The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.