background image

hazards. 

Power tool use and care 

18. 

Do not force the power tool. Use the correct 
power tool for your application.

 The correct 

power tool will do the job better and safer at the 
rate for which it was designed. 

19. 

Do not use the power tool if the switch does 
not turn it on and off.

 Any power tool that cannot 

be controlled with the switch is dangerous and 
must be repaired. 

20. 

Disconnect the plug from the power source 
and/or the battery pack from the power tool 
before making any adjustments, changing 
accessories, or storing power tools.

 Such 

preventive safety measures reduce the risk of 
starting the power tool accidentally. 

21. 

Store idle power tools out of the reach of 
children and do not allow persons unfamiliar 
with the power tool or these instructions to 
operate the power tool.

 Power tools are 

dangerous in the hands of untrained users. 

22. 

Maintain power tools. Check for misalignment 
or binding of moving parts, breakage of parts 
and any other condition that may affect the 
power tool’s operation. If damaged, have the 
power tool repaired before use.

 Many accidents 

are caused by poorly maintained power tools. 

23. 

Keep cutting tools sharp and clean.

 Properly 

maintained cutting tools with sharp cutting edges 
are less likely to bind and are easier to control. 

24. 

Use the power tool, accessories and tool bits 
etc. in accordance with these instructions, 
taking into account the working conditions 
and the work to be performed.

 Use of the power 

tool for operations different from those intended 
could result in a hazardous situation. 

Service 

25. 

Have your power tool serviced by a qualified 
repair person using only identical replacement 
parts.

 This will ensure that the safety of the power 

tool is maintained. 

26. 

Follow instruction for lubricating and 
changing accessories. 

27. 

Keep handles dry, clean and free from oil and 
grease. 

GEB001-6 

DRILL SAFETY WARNINGS 

1. 

Use auxiliary handle(s), if supplied with the 
tool.

 Loss of control can cause personal injury. 

2. 

Hold power tool by insulated gripping 
surfaces, when performing an operation 
where the cutting accessory  may contact 
hidden wiring or its own cord.

 Cutting 

accessory contacting  a  "live" wire may make 

exposed metal parts of the power tool "live" and 
could give the operator an electric shock. 

3. 

Always be sure you have a firm footing. 
Be sure no one is below when using the tool in 
high locations. 

4. 

Hold the tool firmly. 

5. 

Keep hands away from rotating parts. 

6. 

Do not leave the tool running. Operate the tool 
only when hand-held. 

7. 

Do not touch the drill bit or the workpiece 
immediately after operation; they may be 
extremely hot and could burn your skin. 

8. 

Some material contains chemicals which may 
be toxic. Take caution to prevent dust 
inhalation and skin contact. Follow material 
supplier safety data. 

SAVE THESE INSTRUCTIONS. 

 

WARNING: 

DO NOT let comfort or familiarity with product 
(gained from repeated use) replace strict adherence 
to safety rules for the subject product. MISUSE or 
failure to follow the safety rules stated in this 
instruction manual may cause serious personal 
injury. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for SSP MDP303









Reviews: