Makita SKR300, Service Manual, Page: 13 / 41

SKR300 (version 1-12-03)
Page 12
2f. Self-test mode
For burn-in and movement test only.
1. Press and hold H.l. tilt (22)
2. Press On / Off (24) once to switch on
the SKR300
3. Wait until LED X,Y, Z stays on, then
release H.l. tilt
4. Press H.l. tilt (22) once
5. Press Auto / Man (20) once
6. Press “Turn Left” (14) once
7. Press “UP” (17) once
8. Press “Turn Right” (15) once
9. Press “Down” (16) once
Step 4 Step 5 23. 21. 19. 18.
24. 22. 20.
14. 15.
( Step 6 ) ( Step 8 )
( Step 7) ( Step 9 )
The laser beam should be on and the
head will turn and levelling motors will
move to end of X,Y axis. The test will
not stop until power off.
17. 16.