2
ENGLISH
SPECIFICATIONS
The laser-beam lines can be rotated horizontally at any angle of 360
°
by turning the head of the unit.
Mounting thread for connecting to tripod is provided.
Model SK20
Laser-beam line
Laser Type : Red Laser
635nm < 1mw (Laser Class 2)
Line-width : 2.5 mm / 10 m
Emitting angle of the laser-beam line :
Vertical: 140º± 10%
Horizontal: >100º
Diameter of Plumb laser: 1.5 mm
Operating mode
3 modes
Horizontal
Ve Right angle (VePlumb Point (floor)
Right angle (Vertical) + Horizontal
Operating mode
2 modes
Interior / Exterior
Leveling Range
±
2.0º (plumb leveling)
The laser-beam lines will be shut off automatically
without the leveling range.
Leveling Accuracy
±
1mm / 10 m
Power Supply
AA alkaline dry battery, 1.5V : 2 pieces
Operating Time
Horizontal : Approx. 20 hrs.
Vertical l : Approx. 9 hrs.
Ve Horizontal : Approx. 7 hrs.
Battery Warning Signal
Battery life indicator LED (yellow) lights on when the
batteries become weak.
At the end of battery life the laser-beam lines will be shut off.
Dimensions
Diameter ø75mm x Height 159 mm
Weight
750 g (batteries not included)
Tripod Mounting Thread
W 5/8 ”
Standard Equipment
Alkaline dry battery : 2 pieces
Carrying Case
Makita SK20 exclusive uses Elevating Tripod
▪
Due to our continuing program of research and development, the specifications herein are subject to changes without notice.
▪
The operating time varies depending on the operating environment
Symbols
The followings show the symbols used for the laser level.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
Laser class 2
･
Do not stare into laser.
Intended Use
The laser level is developed and designed for
establishing and measuring the accurate level, plumb,
square reference and plumbs points.
SAFETY INSTRUCTIONS
WARNINGS: When using the laser level, basic safety
precautions should be followed to reduce the risk of
personal injury.
Read all these instructions before attempting to operate
the laser level and save these instructions.
For safe operation:
Laser radiation of laser class 2
1.
Do not stare into laser.
2.
Do not direct the laser beam at persons.
3.
Do not remove the warning labels from the unit.
4.
Do not modify the laser level in any way. Service
or maintenance must be performed only by
qualified personnel.
5.
Do not allow children to operate the laser level.
6.
Do not operate the laser level around children.
7. Do not look at the beam directly with optical
