Makita SK106D Manual Download | Manualshive

Page: 22 / 24

background image

Safety instructions

Electromagnetic Compatibility

(EMC)

WARNING

The instrument conforms to the most stringent
requirements of the relevant standards and reg-
ulations. However, the possibility of causing inter-
ference in other instruments cannot be totally
excluded.

FCC statement (applicable in U.S.)

This equipment has been tested and found to com-
ply with the limits for a Class B digital instrument,
pursuant to part 15 of the FCC rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential install-
ation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio com-
munications.

However, there is no guarantee that interference
will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or
television reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:

1.

Reorient or relocate the receiving
antenna

2.

Increase the separation between the
equipment and the receiver

3.

Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected

4.

Consult the dealer or an experienced radi-
o/TV technician for help

This instrument complies with part 15 of the FCC
rules. Operation is subjected to the following two
conditions:

1.

This instrument may not cause harmful
interference, and

2.

this instrument must accept any inter-
ference received, including interference
that may cause undesired operation.

ISED statement (applicable in Canada)

This instrument complies with Industry Canada
license-exempt RSS standard(s). Operation is
subjected to the following two conditions:

1.

This instrument may not cause harmful
interference, and

2.

this instrument must accept any inter-
ference received, including interference
that may cause undesired operation.

Makita SK106D/SK106GD

22

«
...
20
21
22
23
24
»

Summary of Contents for SK106D

























Reviews:

No comments

Related manuals for SK106D

Brand: CST/BERGER Pages: 242

XLiner Pento 360

Brand: CONDTROL Pages: 60

Brand: Kendo Pages: 10

Brand: UNI-T Pages: 2

GreenLiner X2 P5

Brand: Spot-on Pages: 8

Brand: NAP BRANDS Pages: 108

Brand: Zircon Pages: 7

Brand: Westfalia Pages: 15

Brand: VONROC Pages: 40

Brand: Powerfix Profi Pages: 74

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands