Makita SK102, Instruction Manual

Page: 22 / 128

7
Safety instructions Makita SK102
D
EN
F
I
E
P
NL
FIN
PL
SK
HR
SR
RUS
BG
RO
)
Carry out periodic test measurements. Partic-
ularly after the instrument has been subject to
abnormal use, and before, during and after important
measurements.
Refer to section "Checking the accuracy of the Makita
SK102".

WARNING:
Flat batteries must not be disposed of with
household waste.Care for the environment and take
them to the collection points provided in accordance
with national or local regulations.
The product must not be disposed of with
the household waste.
Dispose of the product appropriately in
accordance with the national regulations in
force in your country.
Always prevent access to the product by
unauthorized personnel.
Adhere to the national and country specific
regulations.
All right reserved for changes (drawings, descriptions
and technical specifications).
Electromagnetic Compatibility
(EMC)

WARNING:
The Makita SK102 conforms to the most strin-
gent requirements of the relevant standards and
regulations. Yet, the possibility of it causing interfer-
ence in other devices cannot be totally excluded.
FCC statement (applic. in U.S.)
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful inter-
ference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be deter-
mined by turning the equipment off and on, the user
is encouraged to try to correct the interference by
one or more of the following measures:
•
Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.