C
ircuit diagram
W
iring diagram
P 5/ 6
Color index of lead wires' sheath
Black
White
Red
P
o
wer supply cord
Switch
Field
Insulated
connector
[1] Wiring on Motor Housing
Insulated
connector
Blue or white
*Noise suppressor is not used
for some countries.
1) Route Lead wires (a), (b), (c), (d), (e), (f) through the openings (shaded portions),
and fix them with Lead wire holders. (Fig. D-2)
2) Then route them as illustrated below in Fig. D-2.
Note: Illustrated in Fig. D-2 is Motor housing viewed from the side of A.
Fig. D-1
Fig. D-2
(c) Connecting lead wire (black)
of Brush holder
Insulated connector
that connects (d) and (f)
(d) Connecting lead wire (black)
of Brush holder
(a) Field lead wire (black)
Put Insulated connector
in this depressed portion
of Motor housing.
(e) Field lead wire (red)
(b) Field lead wire (white)
(f) Field lead wire (black)
[A]
Motor housing
Lead wire
holders
Black or brown
[Name plate side]
Noise
suppressor*
Put Insulated connector
in this depressed portion
of Motor housing.
Insulated connector
that connects (a) and (c)
Be sure to place (b) under (a) when fixing
them with this Lead wire holder.
Fix (b) with this Lead wire holder only.
