R
epair
P 2 / 6
< 1 > Repairing armature
(1) Remove router bit, collet nut and stopper pole.
(2) Remove knob (without switch trigger, lock off/on button) by turning it anti-clockwise.
Compression spring 8 is to be removed automatically together with the knob.
Also lock pin has to be taken off from the threaded hole for knob. See Fig.1.
(3) Separate motor section from base section after taking off wing nut M10 and nylon nut M10.
50
40
30
20
10
0
Base section
Motor section
Knob R
Wing nut M10
Nylon nut M10
Compression spring 8
Lock pin
Knob
(5) Remove knob cover R by taking off 2 pcs. of tapping screw 4x18.
Pay attention, not to lose compression spring which may spring out from the knob,
when removing the knob cover.
(4) Take off brush holder cap and carbon brush.
Wing nut M10
Nylon nut M10
Motor section
Base section
Brush holder cap
Collet nut
Compression spring 8
Compression spring 7
Lock off button
Trigger
Knob cover R
Tapping screw 4x18
Knob
Switch
Pan head
screw M6x20
(6) Take off lock off button, trigger and switch from the knob R.
(7) Remove knob R from motor section by taking off pan head screw M6x20
as illustrated in Fig.3.
Fig.1
Fig.2
Fig.3
50
40
30
20
10
0
Brush holder cap
Carbon brush
50
40
30
20
10
0
