Makita RBC2100, Original Instruction Manual

Page: 15 / 58

㩷
13
CORRECT HANDLING OF MACHINE
Attachment of shoulder strap
– Adjust the strap length so that the cutter blade or the Nylon cutting head will be
kept parallel with the ground.
Detachment for RBC200
– In an emergency, pull the release belt (1) strongly upward, and you can
detach the machine from you.
Be extremely careful to maintain control of the machine at this time. Do not
allow the machine to be deflected toward you or anyone in the work vicinity.
WARNING: Failure to maintain complete control of the machine at all could
result in serious bodily injury or DEATH.
PUTTING INTO OPERATION
Observe the applicable accident prevention regulations!
Starting
Move at least 3m away from the place of refuelling. Place the Brush cutter or Grass trimmer on a clean piece of ground taking care that the
cutting tool does not come into contact with the ground or any other objects.
Cold start
For machine with U Handle or Loop Handle
– Push the I-O switch (1) in the direction shown by the arrow.
– First place the machine on the ground.
– Give a gentle push on the primer pump (1) repeatedly (7-10 times) until lfuel
comes into the primer pump.
– Push the choke button (2) to the position “ ”
㩷
㩷
㩷
㩷
㩷
(1)
Hanger