manualshive.com logo in svg

Makita MT952, Technical Information

Share
Download
Makita MT952 Technical Information Download Page 6

W

iring diagram

P 6 / 7

Wiring on switch box

Bottom view

Bottom view

Inflecting the insulated terminals, connect them with 
the switch terminals as illustrated in Fig. B. 

Terminal 
block

Switch

Fix the following lead wires with
these lead holders.
* Noise suppressor's lead wire
   to be connected with terminal block
* Field's lead wire (black) to be 
   connected with terminal block

Pass the following lead wires between
rib A and B.
* Noise suppressor's lead wire
   to be connected with switch
* Field's lead wire (white) to be 
   connected with switch

Rib A

Rib B

Fig. B

Right view

Fix the following lead wires 
with this lead holder.
* Noise suppressor's lead wire
   to be connected with switch
* Field lead wire (white) to be
   connected with switch.
Do not slack these lead wires
between lead holder and switch.

Insulated terminals
to be connected with switch
have to be inflected as illustrated
in Fig. B.

Fix the lead wires of power supply
cord with this lead holder. 

Field lead wire (white

Noise suppressor

Field lead wire 
(white)

Right view

Summary of Contents for MT952








Reviews:

No comments

Brands by name

Popular brands

Load more brands