R
epair
P 3 / 7
Fig. 5
Fig. 9
Fig. 10
< 3 > Assembling armature section (including spiral bevel gear 11)
( 1 ) Pass bearing retainer through the armature shaft. See Fig. 5.
( 2 ) Put flat washer 10 on ball bearing 6000ZZ which has been set on the bearing setting plate. And press armature
with arbor press to mount ball bearing 6000ZZ to armature. See Fig. 6.
( 3 ) Mount spiral bevel gear 11 to armature shaft. And secure it with retaining ring S-6. See Fig. 7.
( 4 ) Mount armature section to gear housing. See Fig. 8.
< 4 > Disassembling gear section
Bearing retainer
Armature
Armature
Bearing retainer
Flat washer 10
Ball bearing 6000ZZ
Bearing setting plate
Fig. 6
Armature
Retaining
ring S-6
Spiral bevel
gear 11
Fig. 7
Gear housing
Fig. 8
( 1 ) Disassemble the product as illustrated in Fig. 1 and Fig. 2 at page 2 in order to separate gear section from
armature section.
( 2 ) Unscrew pan head screws M4x16 and remove bearing box together with spiral bevel gear 36 from gear housing.
See Fig. 9.
( 3 ) Remove spindle by pressing with arbor press. See Fig. 10.
Gear housing
Spiral bevel gear 36
Bearing box
Pan head screws
M4x16 ( 4 pcs.)
Spiral bevel gear 36
Bearing box
Spindle
Bearing setting
plate
