Fig. 8
[3] DISASSEMBLY/ASSEMBLY
[3]-3. Vise section
[3]-4. Base
ASSEMBLING
Take the reverse step of Disassembling (
Fig. 7)
.
Chain has to be fixed to Screw guide on the side where Protrusion is furnished (
Fig. 8)
.
Align the Chain with the Protrusion on Screw guide.
Protrusion on
Screw guide
M8x30 Pan head screw
DISASSEMBLING
Disassemble Base from Motor unit (Fig. 9, Fig. 10, Fig. 11).
Fig. 10
4. Remove chain from hanger
of Handle and move the motor
section up to upper dead end,
till the torsion spring has no
recoil tension.
5. Lay the machine down carefully.
Spring washer 10
Flat washer 10
M10-140
Hex bolt
Flat washer 10
6. Remove M10-17 Hex nut, Flat
washer 10 (2pcs.), M10-140
Hex bolt.
M10-17 Hex nut
Chain
Fig. 9
1. Secure the motor unit with
chain on the rear side.
Spark guard
M6x12 Pan head screw
2. Unscrew M6x12 Pan
head screw and remove
Spark guard.
3. Remove Rubber case and
Rubber block.
Rubber case
Rubber
block
Chain
R
epair
P
6
/
9
